7-Port Managed Industrial PoE+ Switch | 6-RJ45 Ethernet Ports, 1-SFP Fiber Port

Description Technical Specification Key Features Applications

For efficient and reliable connectivity from the network edge device to a backbone switch or server, 7 Port Fiber and Ethernet-managed gigabit switch is designed to extend existing LANs through one 100/1000Base-SX/LX SFP interface using either one or two multimode or singlemode fibers. Full power PoE at 30W is applied to all six ports with no power sharing and added port circuit protection isolates and prevents power interference between ports. The Industrial PoE switches are fully managed Layer 2 switches not only incorporating the industry standard Rapid Spanning Tree Protocol (IEEE802.1w RST) but also a rapid ring recovery protocol enabling operational network recovery in the event of a network or power system failure. These switches are also designed with a redundant power supply to further enhance network reliability and stability. Housed in DIN rail or wall mountable enclosures, the switches are well suited for harsh environments such as industrial security, system automation applications, and ITS.

Typical Applications

•  PoE/PoE+ operation of IP Cameras, with pan-tilt-zoom capability
•  PoE/PoE+ operation of IP cameras with heated/cooled housings
•  PoE/PoE+ operation of transportation-specific/ITS field equipment
• Any networks using Power over Ethernet devices such as IP cameras, intercoms,

7-Port Managed Industrial PoE/PoE+ Switch (SF70760MP)Review

Bethany Studler 4.0 out of 5 stars
May 31, 2024

The SF70760MP 7-Port Managed PoE/PoE+ Switch from Versitron has been a fantastic addition to our network setup. We use it to power devices like IP cameras and wireless access points and it works seamlessly—delivering both data and power over a single cable. The switch is robust even in the dusty, fluctuating environments we work in. What I appreciate is how easy it is to manage and configure. It's made setting up and maintaining our network so much simpler and the performance has been rock solid.

Copper Ports (RJ45)	6-10/100/1000Base-T
SFP Uplink Ports	1-100/1000Base-SX/LX/EX/BX SFP
Port Configuration	Auto MDI/MDI-X
Port Speed	Auto-negotiate
Switch Architecture	Store-and-forward
Switch Bandwidth	17Gbps (non-blocking)
MAC Address	8K Entries
Maximum Frame Size	9.6K Bytes (Jumbo Frames)
Flow Control	Back pressure (Half-Duplex) IEEE 802.3x Pause Frame (Full-Duplex)
Fiber Data Rate	1000Base-SX/LX/EX/BX
Fiber Connector	SFP (Mini-GBIC) port
Fiber Type/Distance	Varies by SFP Module
PoE Standard	IEEE 802.3af IEEE 802.3at
Power Supply Type	End-Span (PSE)
PoE Power Output	48VDC, 15.4 Watts 52VDC, 30 Watts
Power Pin Assignment	½ (+), 3/6(-) default
LED Indicators	Power: On/Green Ethernet: 10/100 LNK/ACT – Amber                 1000 LNK/ACT – Green SFP Port: On/Blink – Green
Management Interface	Console CLI, telnet, Web browser, SSH/SSL secure access SNMPv1 and v2c and v3c
Port Configuration	Enable/disable; Auto-negotiation; 10/100/1000Mbps full-and-half duplex mode selection; Flow control
Port Mirroring	TX/RX Both; Many to 1 monitoring
Bandwidth Control	Ingress/Egress rate control: Configure (100~1000000Kbps) Full Speed 1000000Kbps
VLAN	IEEE 802.1q tagged-based VLAN Up to 256 VLAN IDs Port-Based VLAN Port-Based VLAN, Q-in-Q tunneling Mac-based VLAN, up to 256 VLANs Protocol-based VLAN, up to 128 VLANs MVR (Multiple VLAN Registration)
Link Aggregation	IEEE 802.3ad LACP / Static Trunk; Up to 5 groups of trunk supported
QoS	8 priority queue Traffic classification based on: IEEE802.1p Based Cos, IP DSCP Based Cos,
Multicasting/IGMP	IGMP/MLD Snooping (v1,v2,v3) With Query supported
Access Control List	IP-Based ACL/MAC-Based ACL, 256 entries
SNMP MIBs	RFC-1213 MIB-II RFC-2819 RMON MIB (Group 1,2,3,9)
DC Power Input Voltage	DC~52V, Auto-sensing
Full Load Power Consumption	9 Watts
Dimensions	156 x 114.8 x 60mm
Case	IP44 Metal Case
Housing	DIN Rail Mounting
MTBF	>100,000 hours
Operating Temperature	-40°C ~ +80°C
Storage Temperature	-40°C ~ +80°C
Relative Humidity	0% ~ 95% (non-condensing)

• 6-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
• 1-Port 100/1000Base-SX/LX/EX/BX SFP Type Ports
• PoE Compatible: IEEE 802.3af and 802.3at compliant for PoE and PoE Plus
• Non-blocking store-and-forward switching
• RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
• Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
• Available for operation in Ring or point-to-point configuration
•  Real-time monitoring via Embedded Surveillance Device Management System
• Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
• Distances up to 100 km with optional SFPs
• Available for operation over single mode or multimode fiber over a variety of link budget
• Available for operation over 1 or 2 fibers
• No in-field optical adjustment required
• Redundant dual power supply inputs 48/52 VDC
• 4KV Ethernet Surge Protection for harsh environment
• -40°C to 80°C (-40°F to 176°F) wide range operating temperature
• Compact, corrosion resistant case attaches to a standard DIN Rails

7-Port Managed Industrial PoE+ Switch is used across the following Industries:

Industrial Automation

• Factory Machine Monitoring
• PoE Sensors and Controllers
• SCADA Edge Connectivity
• Automation Panel Installations

Intelligent Transportation Systems (ITS)

• Roadside Traffic Cabinets
• PoE Traffic Cameras and PTZ Units
• Highway Sensor Networks
• Tunnel Surveillance Points

Surveillance & Security

• Outdoor PTZ Camera Poles
• Remote Gate Monitoring
• Perimeter Security Enclosures
• Fiber-Connected Security Nodes

Oil, Gas & Mining Operations

• Rugged PoE Camera Stations
• Environmental Monitoring Sensors
• Harsh-Environment Fiber Links
• Remote Drill Site Networking

Smart City Infrastructure

• PoE Smart Poles
• Urban Surveillance Points
• Environmental Sensor Nodes
• Public Safety Monitoring Stations

Railway & Transit Systems

• Trackside Monitoring Points
• Station Security Cameras
• Fiber-Connected Control Cabinets
• Emergency Intercom Stations

Power Utilities & Energy Plants

• Substation PoE Devices
• Fiber Links for Control Systems
• Outdoor Monitoring Enclosures
• Critical Infrastructure Sensors

Telecommunications Networks

• Fiber Extension Nodes
• Wireless Backhaul Radios
• Edge Network PoE Devices
• Compact Remote Enclosures

Maritime & Port Infrastructure

• Harbor Surveillance Points
• Weather-Exposed Equipment Areas
• Fiber Links Across Terminals
• Dockside PoE Sensors

Warehousing & Logistics Centers

• Loading Dock Cameras
• PoE Access Points
• Fiber Runs to Remote Buildings
• Automated Inventory Stations

Healthcare Campuses

• Outdoor Security Cameras
• Emergency Call Stations
• Fiber-Connected Remote Buildings
• Monitoring Equipment Nodes

Educational Institutions

• Campus Security Cameras
• Outdoor Access Points
• Fiber Connectivity for Remote Sites
• PoE Emergency Stations

Versitron is one of the leading 7-Port Managed Industrial PoE+ Switch manufacturing companies in the USA (based in Delaware). If your industry or installation location isn't listed above, feel free to reach out to us!

Buy the Best 7-Port Managed Industrial PoE+ Switch from VERSITRON at a Competitive Price!!