28-Port Managed Industrial Switch | 24-RJ45 Ethernet Ports, 4-SFP Fiber Ports

Description Technical Specification Key Features Resources & Downloads Applications

For fast and efficient connectivity from the network edge device to a backbone switch or server, the managed Gigabit switch is designed to extend existing LANs through two 100/1000Base-SX/LX SFP interfaces using either one or two multimode or singlemode fibers. The Industrial Managed Switches are fully managed Layer 2 switches not only incorporating the industry standard Rapid Spanning Tree Protocol (IEEE802.1w RSTP), but also a rapid ring recovery protocol enabling operational network recovery in the event of a network or power system failure.

Typical Applications

• Any network utilizing a mix of copper and fiber
• Industrial IP connectivity and communication
• Self-healing Fast Ethernet backbone networks
• Networks using Ethernet devices such as network cameras, access control, intercoms, etc.

28-Port Managed Industrial Switch SF72860M Review

Layton Gant 4.0 out of 5 stars
Feb 28, 2025

The SF72860M has been a solid upgrade for our industrial network. With 28 ports, it gives us plenty of room to connect more devices as our setup grows. Even in harsh conditions, it keeps everything running fast and stable without any hiccups. The management features make it easy to monitor and configure the network, which has helped us optimize performance without extra hassle. If you need a reliable and scalable switch for a larger industrial setup, this one does the job well.

Copper Ports (RJ45)	24-10/100/1000Base-T
SFP Uplink Ports	2-100/1000Base-SX/LX/EX/BX SFP
Combo Ports	2-RJ45/SFP
Port Configuration	Auto MDI/MDI-X
Port Speed	Auto-negotiate
Switch Architecture	Store-and-forward
Switch Bandwidth	26Gbps (non-blocking)
MAC Address	8K Entries
Maximum Frame Size	9.6K Bytes (Jumbo Frames)
Flow Control	Back pressure (Half-Duplex) IEEE 802.3x Pause Frame (Full-Duplex)
Fiber Data Rate	1000Base-SX/LX/EX/BX
Fiber Connector	SFP (Mini-GBIC) port
Fiber Type/Distance	Varies by SFP Module
Power Pin Assignment	½ (+), 3/6(-) default
LED Indicators	Power: On/Green Ethernet: 10/100 LNK/ACT – Amber                 1000 LNK/ACT – Green SFP Port: On/Blink – Green
Management Interface	Console CLI, telnet, Web browser, SSH/SSL secure access SNMPv1 and v2c and v3c
Port Configuration	Enable/disable; Auto-negotiation; 10/100/1000Mbps full-and-half duplex mode selection; Flow control
Port Mirroring	TX/RX Both; Many to 1 monitoring
Bandwidth Control	Ingress/Egress rate control: Configure (100~1000000Kbps) Full Speed 1000000Kbps
VLAN	IEEE 802.1q tagged-based VLAN Up to 256 VLANs groups, out of 4094 VLAN IDs Port-Based VLAN, Q-in-Q tunneling Mac-based VLAN, up to 256 VLANs Protocol-based VLAN, up to 128 VLANs MVR (Multiple VLAN Registration)
Link Aggregation	IEEE 802.3ad LACP / Static Trunk; Up to 5 groups of trunk supported
QoS	8 priority queue Traffic classification based on: IEEE802.1p Based Cos, IP DSCP Based Cos,
Multicasting/IGMP	IGMP/MLD Snooping (v1,v2,v3) With Query supported
Access Control List	IP-Based ACL/MAC-Based ACL, 256 entries
SNMP MIBs	RFC-1213 MIB-II RFC-2819 RMON MIB (Group 1,2,3,9)
Power Input Voltage	100-240VAC, 50/60Hz
Full Load Power Consumption	18 Watts
Dimensions	483 x 280 x 45mm
Case	IP30 Metal Case
Housing	DIN Rail Mounting
MTBF	>100,000 hours
Operating Temperature	-40°C ~ +80°C
Storage Temperature	-40°C ~ +80°C
Relative Humidity	0% ~ 95% (non-condensing)

• 24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 Ports
• 2-Port 1000Base-SX/LX/EX/BX SFP Type Slots
• 2-Port RJ45/SFP Combo Slots
• Non-blocking store-and-forward switching
• RJ45 Port Supports 10/100/1000Mbps‐Full/Half‐duplex, Auto‐negotiation, Auto‐MDI/MDIX
• Prevents Packet Loss w/Back Pressure (Half‐Duplex) and IEEE 802.3x PAUSE Frame Flow Control (Full‐Duplex)
• Available for operation in Ring or point-to-point configuration
• Real-time monitoring via Embedded Surveillance Device Management System
• Uses interchangeable SFP for fiber type, distance and connector (Ordered separately).
• Distances up to 100 km with optional SFPs
• Available for operation over single mode or multimode fiber over a variety of link budget
• Available for operation over 1 or 2 fibers
• No in-field optical adjustment required
• 4KV Ethernet Surge Protection for harsh environment
• -40°C to 80°C (-40°F to 176°F) wide range operating temperature
• Compact, corrosion resistant case attaches to a standard DIN Rails

VERSITRON_SF72860M

28-Port Managed Industrial Switch is used across the following Industries:

Industrial Automation & Control

• Machine-to-machine Ethernet communication
• PLC and SCADA integration networks
• Real-time monitoring of production lines
• Fiber uplinks for remote control units

Manufacturing Plants

• Robotics system connectivity
• High-speed data transfer for assembly lines
• IoT-enabled equipment networks
• Redundant backbone connections

Transportation & Intelligent Traffic Systems

• Traffic signal and controller networks
• Railway and mass transit communications
• Long-distance SFP connections for remote sites
• Monitoring and control of ITS field devices

Energy & Utility Networks

• Smart grid Ethernet networks
• Substation automation connectivity
• SCADA and relay system integration
• Renewable energy monitoring networks

Oil, Gas & Petrochemical

• Pipeline and refinery monitoring
• Remote well-site network links
• Process control communications
• Hazardous location fiber connections

Telecommunications & ISP Networks

• Gigabit access points for customers
• Fiber backhaul for high-speed networks
• Redundant network aggregation
• Outdoor industrial cabinet deployments

Smart Cities & Municipal Networks

• Citywide surveillance systems
• Smart lighting infrastructure
• IoT sensor connectivity
• Traffic and environmental monitoring

Healthcare Facilities

• IP camera networks for hospital security
• Medical device connectivity over Ethernet
• Data center connections within hospitals
• Fiber uplinks for remote facilities

Educational Institutions

• Campus-wide IP networks
• Classroom access point connectivity
• Dormitory fiber backbone links
• VoIP phone system integration

Defense & Aerospace

• Secure network operations
• Field communication infrastructure
• Fiber-connected monitoring systems
• Industrial-grade network reliability

Maritime & Ports

• Port automation and crane control
• Dockside security and surveillance
• Shipyard network connectivity
• Fiber-fed industrial Ethernet links

Water & Wastewater Treatment

• Pump station monitoring
• Environmental sensor networks
• Remote SCADA system integration
• Redundant backbone connections

Mining & Heavy Industry

• Harsh environment industrial networks
• Remote machine monitoring
• Safety and process monitoring
• Fiber-based communications for long distances

Versitron is one of the leading 28-Port Managed Industrial Switch manufacturers in the USA (based in Delaware). If your industry or application isn't listed above, feel free to reach out to us!

Buy the Best 28-Port Managed Industrial Switch from VERSITRON at a Competitive Price!!