Anbieter: Versitron
1-Channel POTS to Fiber Rackmount Installation Kit | Data, ST, SM
Beschreibung
2 Wire FXO/FXS to Fiber Converter Installation Kit
The PK1DS-RM kit provides a turnkey solution for extending a Plain Old Telephone Service (POTS) analog phone line over Singlemode fiber. The FXO unit is installed at the PBX (exchange) side of the link and the FXS unit is installed at the telephone (subscriber) side of the link. These Fiber Optic Teledata Modems are also used to extend RS-485 or RS-422 data up to 64Kbps.
Technical Specifications of 2 Wire FXO/FXS to Fiber Converter Installation Kit:
| Power Requirements | 12VDC, 1.0Amp |
| Connector (Tip & Ring) | RJ-11, 2-Wire Twisted Pair |
| Data Connector | RJ-45 |
| Fiber Interface Connector | LC |
| Installation | Rackmount (2-slot 19” chassis) |
| Fiber Cable | Singlemode: 9/125 (Duplex) |
| Link Margin | Singlemode: 19dBm |
| Audio Signal | Analog, 300Hz to 3.4KHz |
| Idle Channel Noise | -65dBm |
| Single Frequency Distortion | -46dBm |
| 2nd Harmonic Distortion | -55dBm |
| Talk Battery | 44 to 52VDC |
| Loop Current | 40mA max. (off hook) |
| Ring Signal | 92V peak (max), 15 to 67Hz |
| Line Impedance | 600? |
| Operating Temperature | 0° to 50°C (32° to 122°F) |
| Storage Temperature | -40° to 70°C (-40° to 158°F) |
| Humidity | Up to 95% relative humidity (non-condensing) |
| Altitude | Up to 10,000 ft |
Each 2 Wire FXO/FXS to Fiber Converter Installation Kit Includes:
- FXO Unit
- FXS Unit
- External Power Supplies (90-240VAC)
- 100 Meters (328 ft) of Singlemode Cable - Duplex
As a complete package, you get everything you need in a plug & play solution for your phone-to-fiber requirements and you receive a Lifetime Warranty from a trusted manufacturer since 1958! Contact us for assistance by calling (1-800-537-2296) or opening a chat. We are here to help!
Additional Installation Kits Are Available For:
- 1-Channel Phone
- 4-Channel Phone Multiplexer
- 4-Channel Phone Mux With RS-485 Data
- 8-Channel Phone Mux
Key Features 2 Wire FXO/FXS to Fiber Converter Installation Kit
- RJ11
- 600 Ohms Impedance
- LED Indicators
- SFP Module Technology
- 300Hz to 3.4KHz
-
Rackmount Options Manuals for 2-Wire Products
(See Bottom of Page)
